• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 492 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LDC1101EVM: LDC1101EVM

Conor Gray
Prodigy 60 points
Part Number: LDC1101EVM
Other Parts Discussed in Thread: LDC1101,

Hi,

I have an LDC1101 EVM and it was working fine with the LDC1101 EVM GUI, however I updated the firmware with the Sensing Solutions GUI.

Since the firmware upgrade it no longer works with the LDC1101 EVM GUI.

I cannot find the older firmware on TI website.

Is there a place I can find the version of firmware that was on the board when I received it so I can download to get it working again?

Thanks in advance,

Conor.

  • 0
    TI__Mastermind 37605 points

    Conor,


    The LDC1101EVM GUI installer is available from the LDC1101EVM product folder., about a third of the way down the page.
    Alternatively, you can find the installer here.

    Regards,
    John

  • +1 in reply to John Miller - Sensing
    Prodigy 60 points

    Thanks John,

    What I was looking for was the older .txt firmware file.

    When I upgraded the firmware with the Sensing Solutions GUI, the board would no longer connect with the LDC1101EVM GUI.

    I was able to find the older firmware "LDC1101_Firmware.txt " in the folder for the LDC1101EVM GUI.

    I then updated it using the Sensing Solutions GUI and now my board is working with the LDC1101EVM GUI..

    The newer firmware "EVM_LDC1101.txt" wont work with the LDC1101EVM GUI.

    Anyway I am up and running now, also I was able to bring an older board I had to life (that board never worked before).

    In summary it appears that the LDC1101EVM GUI will only work if the "LDC1101_Firmware.txt" installed, and if the board is locked out you need to use the Sensing Solutions GUI to re flash the board.

    Kind regards,

    Conor.