OPT3001-Q1: Is this chip acceptable to be inspected by X-ray to see if it is soldered?

Meng Liu

Intellectual 1765 points

Part Number: OPT3001-Q1
Other Parts Discussed in Thread: OPT3001

Hi Expert

my customer want to inspect OPT3001 whether soldered on the production line so that they want to used X-ray?

If the X-ray method does not work, what method can be used to detect.

over 3 years ago

0 Alex Bhandari-Young over 3 years ago

TI__Mastermind 25895 points

Hi,

I am checking into this.

Best,

Alex

0 Meng Liu over 3 years ago

TI__Intellectual 1765 points

Hi Alex

Do you have any update for this?

0 Alex Bhandari-Young over 3 years ago in reply to Meng Liu

TI__Mastermind 25895 points

Hi Meng,

So far I don't foresee any no issues - but I am still checking a few things here.

Best,

Alex

0 Meng Liu over 3 years ago in reply to Alex Bhandari-Young

TI__Intellectual 1765 points

Hi Alex

Very thanks for your explain.

could I give customer confirmation that the X-ray is no problem because they are waiting our confirm for continue production. it 's very urgency ,so as you know, we need the conclusion.

0 Alex Bhandari-Young over 3 years ago in reply to Meng Liu

TI__Mastermind 25895 points

Yes

Best,

Alex

Sensors

Sensors forum

OPT3001-Q1: Is this chip acceptable to be inspected by X-ray to see if it is soldered?