• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 242 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1843: how to speed up the program flashing to fit massive production

HanDong
Prodigy 220 points
Part Number: IWR1843
Other Parts Discussed in Thread: UNIFLASH

Hi Expert,

currently, I am using uniflash, either GUI or command line to flash the IWR devices... this is really slow progress... not suitable for massive production... Could you suggest how I can speed up the flashing progress? either I could flash multiple device one time? or someother way faster?

Thanks and Best Regards

Dong

  • +1
    TI__Guru 58035 points

    Hello Dong,

    You could write your application directly into the serial flash instead of writing it via the 1843 device. This could be done using QSPI interface , you could write the your application into the flash part and then solder it onto the board. 

    regards,

    Vivek