MMWCAS-RF-EVM: Transmission of captured raw data

Weiwei Shen

Part Number: MMWCAS-RF-EVM

E:\PROCESSOR_SDK_RADAR_03_08_00_00\vision_sdk\apps\src\rtos\radar\src\usecases\cascade_radar_capture_only

I want to use this routine to capture the data transmission to MATLAB. What kind of the data format should be, numRx * numRangbins*numDopplerBins?HOW should I parse in MATLAB?

over 3 years ago

0 Ishita Kochar over 3 years ago

TI__Mastermind 31680 points

Hello Weiwei,

Please take a look at our FAQ for this purpose : https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/925288/faq-mmwcas-rf-evm-cascade-board-related-queries

Hope this helps.

Regards,

Ishita

0 Weiwei Shen over 3 years ago in reply to Ishita Kochar

Prodigy 225 points

HELLO,

I am using PROCESSOR_SDK_RADAR_03_08_00_00,not mmwave studio. The SDK transmits the captured ADC raw data through NetworkTxLink_init of links. Is its data format the same as MMWAVe_studio?

0 Ishita Kochar over 3 years ago in reply to Weiwei Shen

TI__Mastermind 31680 points

Hello Weiwei,

Let me get confirmation on this and return back to you.

Regards,

Ishita

0 Ishita Kochar over 3 years ago in reply to Ishita Kochar

TI__Mastermind 31680 points

Hello Weiwei,

Yes, the data format is same. You can refer to the link I had sent earlier.

Regards,

Ishita

Sensors

Sensors forum

MMWCAS-RF-EVM: Transmission of captured raw data