• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 309 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

FDC2214-Q1: Brownout reset

May
Genius 9880 points
Part Number: FDC2214-Q1

Hi,

I just want confirmation if this IC has a brownout reset.  If yes, what is the voltage that will trigger a reset? Are all the registers set to "RESET" values by a brownout event?

Looking in the datasheet I assumed that there is no feature like this. 

Thank you.

Regards,
Maynard

  • 0
    TI__Mastermind 18545 points

    Hello Maynard, 

    There is not any brownout reset on this device but if the device turns off, the registers will be reset. The minimum supply voltage for this device is 2.7V so if the supply dips below that, you should make sure the registers are configured as desired before continuing operation. 

    Best Regards, 

    Justin Beigel