TI recommendation

Jimmy Huang

Hello：

Does Ti have a pressure sensor signal processing chip that can process dual channel (two half bridge pressure sensors) signals and output the difference in the form of analog voltage.

over 3 years ago

0 Mekre Mesganaw over 3 years ago

TI__Expert 7495 points

Hi Jimmy,

As an alternative to using a pressure sensor to measure pressure, you may be able to use a Hall-effect sensor and a magnet to measure pressure. In this scheme, a mechanism is created so that a magnet moves based on the pressure. The Hall-effect sensor senses the magnetic flux density from the magnet. Based on the sensed magnetic flux density, you can back-calculate the location of the magnet, and therefore, the pressure level.

Regards,

Mekre

0 Jimmy Huang over 3 years ago in reply to Mekre Mesganaw

Genius 3525 points

Hi Mekre：

Thank you for your reply. Is there a suitable recommendation for the Hall effect sensor scheme? Thanks！！！

0 Mekre Mesganaw over 3 years ago in reply to Jimmy Huang

TI__Expert 7495 points

Hi Jimmy,

Can you tell me what you are trying to measure?

Regards,

Mekre

Sensors

Sensors forum

TI recommendation