• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 151 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1843BOOST: Identification of USB port

Hiroyuki Kanematu
Expert 2975 points
Part Number: AWR1843BOOST
Other Parts Discussed in Thread: AWR1843,

This question cannot be identified by connecting the USB connector in the circuit we made to imitate the AWR1843 Boost.

Do I have to pre-configure the AWR1843 to identify the USB?

  • 0
    TI__Mastermind 31680 points

    Hello Hiroyuki, 

    Can you please elaborate on your concern a little more? 

    Are you not able to see the relevant COM ports in the device manager window when you connect the AWR1843BOOST to your PC? 

    Have you followed the EVM user guide closely for connections and made sure everything is in place? 

    Regards,

    Ishita

  • 0 in reply to Ishita Kochar
    Expert 2975 points

    Are you not able to see the relevant COM ports in the device manager window when you connect the AWR1843BOOST to your PC?

    Sorry, I made the circuit which copies AWR1843Boost.
    But, the port not identifer on PC.
    Please just a minutes, I'll show you my circuit later.