• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 198 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR6843AOPEVM: Question about viewing data saved to .DAT files from mmWave Demo

Dan Cederberg
Prodigy 10 points
Part Number: AWR6843AOPEVM
I have been using the mmWave Demo to save data from the AWR6843AOPEVM as a .DAT file and have two questions:
- How is the data structured in the .DAT file?
- Is there a way to visualize the data saved in the .DAT files in similar ways the mmWave demo shows? 
  • 0
    TI__Mastermind 23147 points

    Hello,

    The .DAT file exported from the demo is a saved binary of the UART data that is outputted from the device. This UART data is exactly what the demo uses to visualize the plots shown, and the .DAT file allows you to do your own independent analysis. Unfortunately, the demo visualizer on GUI composer does not support playback at this time

    Best Regards,

    Pedrhom Nafisi