AWR2243: The cascading solution configuration waveform problem

Gmsy Bryant

Part Number: AWR2243
Other Parts Discussed in Thread: AM2732

Hello,TI's enggineers:

Now i try to use two awr2243P and AM2732 to develop cascade radar.So i want to know this scheme support the advancedframe waveform configuration ?

We want config two mode,one is near,another is far mode,so we want to config two profiles、chirps and advanced frame.Can you offer me some datasheet to reference?

Thanks a lot.

Bryant

over 3 years ago

0 Jitendra Gupta over 3 years ago

TI__Guru 69960 points

Hi Bryant,

Are you looking for HW schematic for 2 chip cascade with AM2732?

Or software APIs for two mode of configuration?

Regards,

Jitendra

0 Gmsy Bryant over 3 years ago in reply to Jitendra Gupta

Expert 1650 points

Hi Bryant,Jitendra Gupta,

I want to get software APIs for two mode of configuration.Can you offer me some datasheets or demo code to reference?

Thanks a lot.

Bryant

0 Jitendra Gupta over 3 years ago in reply to Gmsy Bryant

TI__Guru 69960 points

Hi Bryant,

mmWave DFP provides cascade reference application

C:\ti\mmwave_dfp_02_02_03_01\ti\example\mmWaveLink_Cascade_Example

I would suggest you to have proper understanding of RF front end configuration using mmwavelink library/API which Host application is gonna use to configure AWR device.

Above mentioned application exemplifies that.

And you can refer this https://dev.ti.com/tirex/explore/node?node=AObIl5yAPR-DjIwxgdgyuA__AocYeEd__LATEST (MRR)

which showcases multi mode Short and medium range at every alternate frame, which you can refer to implement in your application.

Regards,

Jitendra

Sensors

Sensors forum

AWR2243: The cascading solution configuration waveform problem