I’m importing the schematic symbol and footprint from the TI website and I can see the schematic symbol fine (first image), but the footprint isn’t showing. (.PcbLib file second pic) Have you ran into this, and been able to show the footprint?
I followed these instructions: https://app.ultralibrarian.com/content/help/?altium_designer.htm and also used the below zip file
Hi Charlie,
After importing the schematic symbol and footprint you will need to double-click the source document and then click the "Panel" button in the lower right hand corner. Then choose "PCB Library" and from there you can click on the available footprints. This is documented in the Import Guide .html from the downloaded folder.
Best regards,
Nicole
