AWR1843BOOST: How to undo sflash Formmating in uniflash?

ashis pandey

Part Number: AWR1843BOOST
Other Parts Discussed in Thread: UNIFLASH

I was trying to solve a same problem by following this link, but it didn’t work and it got worse.

I formatted sflash of UART COMPORT in uniflash

I want to undo this process, how can i do it?

+1 Cesar over 3 years ago

What do you mean by undo?

Do you want to erase the flash? Do you want to flash a different binary?

Please let us know

thank you

Cesar

+1 ashis pandey over 3 years ago in reply to Cesar

I erased the flash of UART comport (in my case it is comport6)

i made a mistake, now I say I didn’t intend to/want to erase. How do I get back to normal ?

0 ashis pandey over 3 years ago in reply to ashis pandey

In short, I didn’t want to erase the flash, but I did…… by mistake

+1 Cesar over 3 years ago in reply to ashis pandey

Understood,

You can just re-flash the binaries.

The binaries for the mmWave SDK demo are provided in

Please follow instructions in mmWave SDK User guide.

C:\ti\mmwave_sdk_03_05_00_04\packages\ti\demo\xwr18xx\mmw\xwr18xx_mmw_demo.bin

Thank you

cesar

+1 ashis pandey over 3 years ago in reply to Cesar

if so, which page is it?

Sensors forum