MMWAVE-STUDIO: Please Teach me some message

Hiroyuki Kanematu

Expert 2975 points

Part Number: MMWAVE-STUDIO

Hello, I want to know meaning of these messages which emerge in output bar.
(What state in the device ?)

(1) Test Source Already Disabled...!!!
(2) TESTING = false

over 3 years ago

0 Cesar over 3 years ago

TI__Guru*** 148804 points

Hi,

The sensor has internally a Test Source

This messages indicate that the Test Source is not used

thank you

Cesar

0 Hiroyuki Kanematu over 3 years ago in reply to Cesar

Expert 2975 points

Hello, Thank you for replying.

Is 'Test Source' default program in xWR1843 BOOST?
If we set the ourselves chirp program, Does 'Test Source Already Disabled...!!!' shows on the PC monitor?

0 Cesar over 3 years ago in reply to Hiroyuki Kanematu

TI__Guru*** 148804 points

Test Source is a feature that is not enabled by default in the chip.

The message 'Test Source Already Disabled...!!!' is generated by mmWave Studio.

thank you
Cesar

Sensors

Sensors forum

MMWAVE-STUDIO: Please Teach me some message