• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 405 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR2243: Create Application response from the capture card timeout

May
Genius 9880 points
Part Number: AWR2243
Other Parts Discussed in Thread: TDA2

Hi Team,

I was trying to collect data with TI 2243 cascade radar and successfully execute the Cascade_Configuration_MIMO.lua script. However, while trying to execute cascade capture.lua, I'm getting the following error message:

In the support forum somebody face this issue earlier with 1243 radar, but their issue was configuring frame with 2 chirps. In my case, each frame has 128 chirps. so I can't see where things are going wrong. It would be great to have help me on this. I've attached the config.lua & cascade_caputre.lua here.

2275.LUA.zip

Thank you.

Regards,
May

  • 0
    TI__Genius 13805 points

    Hi,

               This seems to be TDA2 ethernet connectivity issue, can you please confirm the physical connection to TDA2(including the Ethernet cable and power supply)? also are you able to access the serial console of TDA2 in this state?

    Regards