• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 206 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AWR1843BOOST: How to turn on DS3 LED on AWR1843Boost Board?

AWR1843BOOST: Turn on the DS3 LED on the AWR1843 board

Wajih Youssef
Intellectual 535 points
Part Number: AWR1843BOOST
Other Parts Discussed in Thread: AWR1843

Hello is there a way to turn on the ds3 led on the awr1843 device ? I started a new project on code composer I found something similar  in this thread https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1111601/awr1843boost-how-to-turn-on-ds3-led-on-awr1843boost-board?tisearch=e2e-sitesearch&keymatch=ds3%20led# but still couldn't know how. there is a mentioning of an example in the SDK C:\ti\mmwave_sdk_03_04_00_03\packages\ti\drivers\gpio but where exactly ? 

thanks  

  • +1
    TI__Mastermind 35145 points

    Hello Wajih,

    The test application path is actually
    C:\ti\mmwave_sdk_03_05_00_04\packages\ti\drivers\gpio\test\xwr18xx
    Under this you can find the example for the AWR1843 where they have configured the GPIO 2 as output.
    This should help you with the reference code.

    Regards,
    Saswat Kumar