AWR6843AOP: Firmware - Vital Signs with People Tracking

Hello,

Can you please share what you send before the sensorStart? Are you sending a sensorStop first? Are you sending in new CFG commands each time?

Thank you,

Angie

Hello,

First we send the configuration commands as specified in the cfg file.

Then we execute the command sensorStart. We parse the TLV data

After, we send sensorStop.

We iniitate sensortStart 0, we get TLV data then sensorStop

We repeat the previous steps.

After three repetition, the radar device is block, that means the sensorStart 0 is not processed.

Hello Mustapha,

A soft reset needs to be sent between the sensorStop and the sensorStart. The instructions to add a soft reset CLI command to the firmware can be found in this lab.

Thanks,

Angie

Hello,

The idea is to reduce the maintenance from our side, and to have stability of firmware when updating new firmware you publish.

Do you plan to add this command in your firmware ? Can you explain us how it works ?

Thank you

Hello Mustapha,

Could you please confirm that we may close this thread, or do you have more questions?

Thank you.

Best regards,
François.