• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 177 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

IWR6843ISK: Modifiying oob_parser.py to read .bin and convert to .csv

IWR6843ISK: ong-range people detection using oob_parser.py

Marvn Arcangel
Genius 12395 points
Part Number: IWR6843ISK

Hi Team,

This is a continuation of this thread.

The customer is now running the long-range people detection and would like to have the output parsed and saved in a .csv format.

However, the file being saved does not contain any data. Can you confirm if this get point clouds even with long range people detection firmware and corresponding config file?

I found this thread  and advice the customer to do the same but it does not work either.

Regards,

Marvin

  • 0
    TI__Genius 17265 points

    Hi Marvin,

    If you take a look at the source, the text struct for the text file output is only generated for 2 cases. Customer would need to add the case for Long Range People Detection and ensure the struct is properly filled out in the format which they want to output.

    Best Regards,
    Alec