This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Champ,
I would like to design ISK-ODS antenna with different input orientation (for ex Tx1 from bottom, Tx2 from top, etc) just like bellow,
My question is, will this TX orientation has any effect to the phase rotation, especially in 3d people counting phase rotation?
Thank you very much.
Wolfgang
Yes this orientation will have an effect on Phase. You are rotating TX2 and TX3 by 180 degrees.
Hope this helps,
-Shareef