DCA1000 Error : The number of files captured is zero!

Yuna Lee

Prodigy 10 points

Other Parts Discussed in Thread: IWR6843ISK, MMWAVEICBOOST

Hi,

I just have problem with stacking IWR6843isk with DCA1000.

But mmwave studio continuously print out follow

"Error : The number of files captured is zero!"

Also, I can't find any *.bin data in the link \mmwave_studio_02_01_01_00\mmWaveStudio\PostProc.

If you have any idea of what i can do, please let me know.

Thank you.

over 3 years ago

0 Pedrhom Nafisi over 3 years ago

TI__Mastermind 23357 points

Hello,

A few questions for you. Are you using IWR6843ISK with a MMWAVEICBOOST or without? If you are using it without the ICBOOST, then can you confirm that the ISK revision you have supports it? You can check using the DCA1000 User Guide found on our Industrial Toolbox for mmWave Sensors (https://dev.ti.com/tirex/explore/node?a=VLyFKFf__4.12.0&node=ADM7JMPr28skUt9Iw1fYGQ__VLyFKFf__4.12.0). The guide includes many debugging steps and links to start with and I would like you to confirm if you have checked this document.

Best Regards,

Pedrhom Nafisi

Sensors

Sensors forum

DCA1000 Error : The number of files captured is zero!