• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 136 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

PGA302EVM-037: PGA302EVM-037: MSP430 Firmware and GUI Source Code

PGA302EVM-037: Tools to automate the configuration and calibration of the devices

jiming feng
Prodigy 20 points

Part Number: PGA302EVM-037

Hi Scott,

We are using the PGA302 in our new project. Each device needs to be calibrated independently.

Is there any tools to automate the configuration and calibration of the devices?

Best regards,

Jiming Feng

  • 0
    TI__Mastermind 31655 points

    Hi Jiming,

    We are currently developing a tool for the PGA300 that will do just what you are describing: configure and calibrate multiple devices in a production setting. The initial version will be completed soon, and support for the PGA302 will be implemented after. The current target is for the PGA302 support to be added by the end of the year or early 2023. I will let you know as soon as we have something to share.


    Regards,
    Scott