AWR1843BOOST: AWR1843BOOST: The board reported an error

? ?

Part Number: AWR1843BOOST

1、Probability error occurs during power-on. Indicator DS1 is red on (hardware error occurs)

2、When the configuration program is loaded through the upper computer, the indicator DS1 is red on

In a word, the board is unstable and the error rate is very high. Please confirm whether it can be returned and replaced. Thank you!

over 2 years ago

0 Cesar over 2 years ago

TI__Guru*** 147894 points

Hi,

Is this a new board?

Thank you

Cesar

0 ? ? over 2 years ago in reply to Cesar

Prodigy 10 points

hello

Yes, we received the goods in July, but there was a problem in August. We have been giving feedback on your Chinese website

0 Cesar over 2 years ago in reply to ? ?

TI__Guru*** 147894 points

Thank you

I will ask the hardware team to review this issue

Cesar

0 aozer over 2 years ago in reply to Cesar

TI__Mastermind 29825 points

Hello,

Are you using a custom application or is the error seen with the OOB demo? If it is a custom application, can you try flashing the OOB demo and see if the error is seen?

If you erase the flash and then power it on is the error seen?

regards,

Adrian

0 ? ? over 2 years ago in reply to aozer

Prodigy 10 points

After we try, we still call the police. Could you please exchange the goods for us

0 ? ? over 2 years ago in reply to aozer

Prodigy 10 points

After we try, we still call the police. Could you please exchange the goods for us

Sensors

Sensors forum

AWR1843BOOST: AWR1843BOOST: The board reported an error