How to print log information in CCS

Jun Fang

Other Parts Discussed in Thread: IWR1843

Hi,

I am debugging mmwave out-of-box demo, I found some log informaiton e.g.,"RL_LOGV_ARG0("rlSetChannelConfig ends...\n"); in rl_sensor.c" really helps for trace errors.

How to turn on the output of these log infomation? Thanks.

over 2 years ago

0 Pradipta Bandyopadhyay over 2 years ago

TI__Mastermind 32825 points

Hi,

Can you please mention the device you are using and which version of the SDK you are using and if you have made any changes to the demo files?

Thanks,

Pradipta.

0 Jun Fang over 2 years ago in reply to Pradipta Bandyopadhyay

Prodigy 170 points

I am using mmwave_sdk_03_06_00_00-LTS in IWR1843, and I plan to modify the out-of-box demo. Thanks.

+1 Pradipta Bandyopadhyay over 2 years ago in reply to Jun Fang

TI__Mastermind 32825 points

Hi,

The log information will not be outputted to the console. It is used for internal logging there is no way you can get this information on the console.

Thanks,

Pradipta.

0 Jun Fang over 2 years ago in reply to Pradipta Bandyopadhyay

Prodigy 170 points

OK. Thanks.

Sensors

Sensors forum

How to print log information in CCS