LMP91000EVM: LMP91000EVM

Bob Livingston

Prodigy 10 points

Part Number: LMP91000EVM
Other Parts Discussed in Thread: LMP91000, MSP-EXP430FR6989

Does the LMP91000EVM require the SPIO4 Board? Is the SPIO4 Board shipped with the LMP91000EVM?

Thanks

Bob

over 2 years ago

0 Josh Wyatt over 2 years ago

TI__Guru* 91206 points

Bob -

That EVM does not implicitly require the SPIO4 board, you are free to use an MCU board (like an MSP430 Launchpad) to interface to.

The SPIO4 board was discontinued in 2020.

Here is a link to firmware project https://www.ti.com/lit/zip/snac032 which is supported by multiple MSP430 devices. - https://www.ti.com/lit/an/snaa138c/snaa138c.pdf (Reference Manual for using MSP430 Firmware with the LMP91000)

Available -F5529 platform to use ==> https://www.ti.com/tool/MSP-EXP430F5529

0 Bob Livingston over 2 years ago in reply to Josh Wyatt

Prodigy 10 points

I recently purchased a MSP-EXP430FR6989 Launchpad Board. Should I try that?

Thanks

Bob

0 Josh Wyatt over 2 years ago in reply to Bob Livingston

TI__Guru* 91206 points

Bob -

I have to admit (I am more of a hardware person) I personally always had some trouble porting regular MSP430 projects to FRAM MSP430, but if you have done that before I am sure it can work, but we may need to ask the MSP430 folks for help if you run into any issues. (which we can totally do)

Sensors

Sensors forum

LMP91000EVM: LMP91000EVM