AWR1843BOOST: How to measure and reduce the interference between the Radar sensors?

Lei

Expert 2050 points

Part Number: AWR1843BOOST

Assuming multiple radar sensors are put together and work together at the same time. If they are close together, I think they must be interfering with each other.

I use Automotive Lab demo mrr. Does this inteference can be reduced by firmware configuration?

How radar sensors can reduce the inteference with each other?

Thanks

over 2 years ago

0 Kaushik Gowda over 2 years ago

TI__Mastermind 20605 points

Hi Lei,

I would suggest you go through the interference mitigation and detection labs present in the Platform toolbox 1.2.1 to get an understanding of how this can be performed using software.

To get a better understanding of the interference phenomenon and possible mitigation techniques you can go through this particular application note:

Interference Mitigation For AWR/IWR Devices (Rev. A)

Regards,

Kaushik

Sensors

Sensors forum

AWR1843BOOST: How to measure and reduce the interference between the Radar sensors?