• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 299 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DCA1000EVM: MMWAVE STUIDIO - 4-chip cascade MIMO MATLAB example

AWR1843BOOST: Antenna position to be defined in mmwave studio MATLAB example

Chengqian Hu
Prodigy 50 points
Part Number: AWR1843BOOST
Other Parts Discussed in Thread: DCA1000EVM

Hi,

I'm trying to modify the MATLAB 4chip_cascade_MIMO_example provided with mmwave studio to process the raw ADC data coming from AWR1843BOOST + DCA1000EVM. In DOA_beamformingFFT_2D.m, it requires the specified antenna position defined in module_param.m. How should I modify the variables shown in the attached figure for AWR1843BOOST?

Kind regards,

Chengqian

  • 0
    TI__Guru 69960 points

    Hi,

    I would suggest to have proper understanding of the code flow and signal processing which will help you porting cascade related script to single chip device antenna.

    I'm afraid I can not help you here with that custom development or code modification.

    .

    Regards,

    Jitendra