Other Parts Discussed in Thread: AWR1843,
Hello, I have a question.
①Is it correct to think that txOutPower in Proflecfg in the SDK user guide will reduce the power by the value entered?
In AWR1843, the transmission power is 12 dBm, but if you put 1 in txOutPower, it seems that the transmission power becomes 11 dBm??
By the way, if you set this to 0, the output value is 1.
(2) Regarding the calculation of the antenna gain, I am doing the following calculation. Is there any problem?
Antenna Gain = 4π/((half width of E plane)*(half width of H plane))
If not, please let me know the formula as well.