Hello,
I would like to design a sensing coil for the LDC1101.
Which parts list in Coil Designer should I select? (See attached PNG File)
Thank you,
Tomo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I would like to design a sensing coil for the LDC1101.
Which parts list in Coil Designer should I select? (See attached PNG File)
Thank you,
Tomo
Tomo,
We recommend using our Inductive Sensing Design Calculator Tool.
It is an Excel-based tool you can download from the above link and it supports a coil design for the LDC1101.
Regards,
John
Hello John,
Thanks for your information of the tool.
Can I get the design parameters for the coils of the LDC1101EVM Board?
"The design parameters" are the values that should be entered in the yellow cells of the Excel sheet "Spiral Inductor Designer".
Regards,
Tomo
Tomo,
I am sorry, but we do not have a list of the design parameters based on the EVM.
You can get some of the information from the EVM user's guide and schematic BOM.
You might be able to approximate the coil parameters by measuring it on the PCB.
Regards,
John