• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 272 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843AOPEVM: How to configure data processing chain using data path manager?

kevin yi
Prodigy 30 points
Part Number: IWR6843AOPEVM
Other Parts Discussed in Thread: IWR6843AOP

Hi TI,

Can I get information about on how to configure Data Processing Chain using Data Path Manger?

If there is datasheet or manual available, Please let me know.

I need some simple example for above which I questioned.

Thank you.

Best Regards,

Kevin,

  • 0
    TI__Genius 10730 points

    Hi Kevin,

    In your SDK download for SDK 3 you will find the following path: mmwave_sdk_03_06_00_00-LTS\docs\mmwave_sdk_module_documentation.html which will take you to a landing page for our SDK documentation. This documents our out of box demos. 

    The SDK is an example of a DPC using a DPM. The links highlighted below will help you get started. If using IWR6843AOP with OOB demo that is going to be Object Detection using HWA. 

    If you are using 3D People Counting this has it's own example of a DPC configured by a DPM and is documented in our 3D People Counting Implementation Guide.

    Thank you,

    Angie