This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MMWAVE-SDK: About cfg(AWR1843Boost)

Part Number: MMWAVE-SDK

In the profile.cfg in the SDK, the cfarcfg threshold is set to 15.0. Please tell me the reason for this value.


C:\ti\mmwave_sdk_03_05_00_04\packages\ti\demo\xwr18xx\mmw\profiles\profile_3d.cfg

cfarCfg -1 0 2 8 4 3 0 15.0 0
cfarCfg -1 1 0 4 2 3 1 15.0 0

  • Hi Hiroyuki-san,

    Please note that these values for CFAR threshold are derived experimentally for our test setup to produce the best results. You will have to adjust the same for your use case, configuration and environment to obtain the best results.

    Regards,

    Kaushik