• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 202 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843ISK: IWR6843ISK: Elevation estimation

John Park
Prodigy 90 points
Part Number: IWR6843ISK

Hi, I am now using IWR6843ISK. I am now using Tx1 & Tx3 Antenna of  IWR6843ISK.

I know that if we are trying to get xy coordinate we need to know the elevation value, but i didn't use number Tx2.

So I was wondering is there any method to get elevation value not using Tx2???

  • 0
    TI__Mastermind 19800 points

    Hello.

    If you use Tx1 and Tx3, there is no way to get elevation information as both transmitter are level with each other.  In order to get elevation information, you need variation in the height of the antennas.  You can still use two antennas, but you would need to use either Tx1 and Tx2 or Tx2 and Tx3.

    Sincerely,

    Santosh