• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 709 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843: How to set beamform in mmwave studio

Shine
Genius 13655 points
Part Number: IWR6843
Other Parts Discussed in Thread: MMWAVEICBOOST,

Hello Champs,

Customer used IWR6843ISK+MMWAVEICBOOST+DCA1000 to capture raw data, he wanted to detect two objects which are in the same distance but in different angle by using Beamform. 

How to configure beamform in mmwave studio to get below result.




Thanks
Rgds
Shine

  • +1
    TI__Mastermind 37805 points

    Hi Shine,

    Is the customer referring to TX beamsteering here (pointing the transmitted wave in different directions) or RX beamforming (reconstructing the angle information from readings from multiple receivers)? TX beamsteering will not necessarily improve resolvability of multiple objects because of its side-lobe power. RX beamforming may improve resolvability, but that will depend on the algorithm used, which is not something mmWave Studio does.

    Best,

    Nate