Hall sensor -55 °C to +85 °C operating range with small package

Sayali Shinde

Hello Team,

We have one requirement for a hall sensor with the lowest temp rating of -55 °C to +85 °C operating range, with a small package (SOT23 or even smaller).

Please suggest a hall sensor which has a min temperature rating of -55 °C. We didn’t find any hall sensors with this rating on the catalogue page.

Regards,

Sayali

over 2 years ago

0 Scott Bryson over 2 years ago

TI__Mastermind 21250 points

Sayali,

Unfortunately, none of our currently available Hall-effect devices have specified performance shown at temperatures below -40C. If you are willing to provide more details regarding your specific application, we would be happy to assist you select the best device, but operation outside of the published temperature ranges may result in unknown performance shifts.

Thank you,

Scott Bryson

0 Sayali Shinde over 2 years ago in reply to Scott Bryson

Intellectual 705 points

Hello Bryson,

Thank you . we required this for Aerospace and Defense application. our major requirement is of temp -55C.

Regards,

Sayali

0 Scott Bryson over 2 years ago in reply to Sayali Shinde

TI__Mastermind 21250 points

Sayali,

This makes sense. If there were a way to ensure that the temperature would remain above -40C, then this may work. However, since we have no devices with published characterization below this temperature I cannot make any recommendations at this time.

Thank you,

Scott

0 Sayali Shinde over 2 years ago in reply to Scott Bryson

Intellectual 705 points

Thanks Scott for support.

Sensors

Sensors forum

Hall sensor -55 °C to +85 °C operating range with small package