• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 367 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCA1000EVM: How to obtain the data near real-time with AWR1843BOOST+ DCA1000EVM on Matlab?

Abdullah AKAYDIN
Prodigy 20 points
Part Number: DCA1000EVM
Other Parts Discussed in Thread: AWR1843BOOST,

Hi 

I recently receive an AWR1843boost and DCA1000EVM for my project. I am trying to obtain data (1 measurement cycle e.g 128 chirps) and process it (determining the range, velocity, azimuth and elevation angles), obtain another measurement and process it which should be a continuing data stream and processing. I believe it is not possible with the mmwave studio. Thanks in advance for any ideas and documentation. 

Kind Regards

Abdullah

  • 0
    TI__Guru*** 148104 points

    Hi,

    You are correct, with mmWave studio you will be able to capture raw data and post process it later.

    This is the only mode of operation supported by TI.

    That being said, over the years some members of this forum were able to stream the data using the DCA1000 to a PC real time.

    Let's open this question to other forum members

    You can also use google site search to find previous thread.

    For example, you may search something like this

    site e2e.ti.com dca1000 streaming

    Thank you

    Cesar