• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 187 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843: Is APIs available to monitor BIST in IWR6843?

Mohan C
Prodigy 130 points
Part Number: IWR6843

Hi,

I need to monitor the IWR6843 device internal statuses including BIST, Noise levels.

Is APIs available to monitor these parameters in IWR6843.

Please suggest me.

Thanks

C Mohan

  • 0
    TI__Mastermind 23017 points

    Hello Mohan,

    If you go to the mmWaveLink Framework Doxygen, under the modules tab will be a section on monitors. Here you will find information of APIs involving noise figure and BIST.

    C:/ti/mmwave_sdk_03_06_00_00-LTS/packages/ti/control/mmwavelink/docs/doxygen/html/index.html

    Best Regards,

    Pedrhom