• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 518 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWRL6432BOOST: Inquiry

Ray Vincent Aranzaso
Mastermind 18180 points
Part Number: IWRL6432BOOST
Other Parts Discussed in Thread: MMWAVE-L-SDK

Hi,

Good Day.

The customer is trying out this evaluation board, found this document online (https://www.ti.com/lit/er/swrz137/swrz137.pdf?) and he try doing these steps but he had these 2 questions:

1) How to enable continuous wave (CW) streaming mode?

2) How to change TX output power level?

Please advise. Thank you very much.

Best Regards,

Ray Vincent

  • 0
    TI__Mastermind 23067 points

    Hello Ray,

    You can enable CW and turn up TX PWR backoff via configuration file sent to the device. In the MMWAVE-L-SDK HTML User guide, under the Motion and Presence demo the config parameters are documented and you will find what you are looking for here.

    C:/ti/MMWAVE_L_SDK_05_01_00_04/docs/api_guide_xwrL64xx/EXAMPLES_MOTION_AND_PRESENCE_DETECTION.html

    Best Regards,

    Pedrhom Nafisi