• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 350 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR2243: How to active and mapping the fatal error to NERROR OUT

Lei Tao Tao
Prodigy 170 points
Part Number: AWR2243

Hi,

With external pull-up, NERROR_OUT at High level after power up.

When short XTAL, I2C to GND, there is no change to NERROR_OUT( keep High level).

I want to know how to active the NERROR_OUT, and mapping the fatal error to it?

Thanks!