AWR6843: I want to check the noise input to the antenna RX channel using DCA1000EVM & AWR6843ISK

Junehee Park

Intellectual 320 points

Part Number: AWR6843
Other Parts Discussed in Thread: DCA1000EVM,

I want to check the noise input to the antenna RX channel using DCA1000EVM & AWR6843ISK.

I checked that the interface is connected as shown in the picture below.

So I followed the user guide, but I couldn't connect.

Please tell me how to set up EVB and mmWave Studio.

over 2 years ago

+1 Luke Rouleau over 2 years ago

TI__Expert 4448 points

Hello,

Can you please send us a picture of your setup? We would like to confirm the configuration of your boards and switches.

Thanks,
Luke

+1 Kevin Ortiz over 2 years ago

TI__Expert 3525 points

Hi Junehee,

It looks like you are missing Matlab Runtime 8.5.1. Ctrl+Click the below download link to download this dependency. For reference, here is a DCA1000 mmWave Getting Started Guide in case you need further help: dev.ti.com/.../node

MATLAB Download

Best Regards,

Kevin

0 Junehee Park over 2 years ago in reply to Kevin Ortiz

Intellectual 320 points

I resolved issue after intalled Matlab. Thank you for your help ^^

Sensors

Sensors forum

AWR6843: I want to check the noise input to the antenna RX channel using DCA1000EVM & AWR6843ISK