This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCA1000EVM: How to add time_stamp to DCA1000 raw data?

Part Number: DCA1000EVM
Other Parts Discussed in Thread: IWR6843

Hi:

I am trying to achieve synchronization between DCA1000(with radar IWR6843)and another equipment.But I found that the data from mmwave_studio miss time information.

How to add time_stamp to DCA1000 raw data with mmwave_studio ?

Regards.

Yuan

  • Hi Yuan, 

    First, I apologize for the delay. I have had issues with our system after updating my email address.

    Can you please expand on where exactly you would want time stamps inserted? There are start and end times in the output log, but there is not per chirp time stamping available. Nothing with the DCA1000 is real-time, so if you want some sort of real-time synchronization, this will not be possible. If you are doing something retroactively, with a start time, end time, and number of received packets, you could deduce the amount of time per packet.

    Regards,
    Luke