• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 199 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR6843: I want to know about the ground area of the AWR6843ISK antenna.

Junehee Park
Intellectual 320 points
Part Number: AWR6843

Hi~

1. Why did you SILVER PLATING the GND area around the antenna after opening the PSR as shown in the picture below?

2. Why surround the GND around the antenna as shown in green in the picture below?
   - If it's because of noise, is it good to design the GND as wide as possible?