IWR6843ISK: Data synchronization between Vital sign demo results and ECG sensor

Houdali,

Thank you for reaching out on our e2e forums. I am going to look into this and get back to you shortly.

Thanks,

Angie

Houdali,

Please see this e2e ticket: https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1175178/iwr6843-clock-synchronizaton?tisearch=e2e-sitesearch&keymatch=iwr6843%2520external%2520clock#

Thank you,

Angie

Hi,

Thank you for your feedback.

I'm looking to sync data from the vital signs demos and data from the ECG sensor to get the same time stamp. So the link sent is related to the RF clock, this is not my request.

This is any way to validate the EVM demo with an external clock (e.g. computer)?

Thanks

Hi Houdali,

There is no clear way to do this within our software. We align things by trying to start two technologies at the same time and using time stamps.

Thanks,

Angie

Hi,

We can't get enough of the alignment of both sensors, because wera are looking for the precision of some milliseconds.

So, There is any way to set the clock of radar?

Hi Houdali,

Please see this thread: https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1208697/dca1000evm-radars-clock-synchronization?tisearch=e2e-sitesearch&keymatch=set%20radar%20clock# 

Thank you,

Angie