AWR1843BOOST: I can't create a cfg file for 2D

Hiroyuki Kanematu

Part Number: AWR1843BOOST

I made a cfg file for AWR1843BOOST with mmWave Sensing Estimator, but an error occurs even if I make a file for 2D measurement and load it.

Is it possible to create a 2D version of the Estimator?

over 2 years ago

0 Kaushik Gowda over 2 years ago

TI__Mastermind 20605 points

Hi Hiroyuki,

Can you please elaborate what you mean by 2D version of the estimator? And can you also explain what errors you see when you try to generate a 2D config.

Regards,

Kaushik

0 Hiroyuki Kanematu over 2 years ago in reply to Kaushik Gowda

Expert 2975 points

Sorry for the late reply.
I would like to ask if it is possible to create a cfg file for the 2D version (Azimuth direction) only with the file created by the estimator.

+1 Kaushik Gowda over 2 years ago in reply to Hiroyuki Kanematu

TI__Mastermind 20605 points

Hi Hiroyuki,

The sensing estimator allows for you to do a chirp design and implement your chirping scheme for the mmwave SDK demo application. There is no option to choose a 2D only mode in the tool as you seek. The sensing estimator provides a full cfg for the demo based on the chirping you have designed on it (within supported limits of the demo).

You can click on Help->User's guide to see what can be done with the sensing estimator tool.

Regards,

Kaushik

Sensors

Sensors forum

AWR1843BOOST: I can't create a cfg file for 2D