The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 238 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1843: RF/Analog sub-system power domain

user244678
Expert 1355 points
Part Number: IWR1843

Hi,

Please tell me about the power domain of the IWR1843 RF/Analog sub-system.

In the IWR1843 datasheet Figure 4-1. Functional Block Diagram,

From which power terminals will each element of the RF/Analog sub-system be powered?

For example, please answer in the form that the PA is powered from the VIN_13RF pin.

Best regards,

Hiroyuki Taguchi