AWR2243BOOST: Profile Configuration

Iulian Sava

Prodigy 70 points

Part Number: AWR2243BOOST

Hello!

I have a question regard the way the parameters are working together,

I am struggling to understand a few errors code .

If you are can explain to me the errors codes for 38, 41, 46?

For 41, how to calculate adc sampling time?

For 46, how to calculate ramp end freq?

For 38, I do not understand what it means

Thanks,

Iulian

over 3 years ago

0 Pradipta Bandyopadhyay over 3 years ago

TI__Mastermind 35785 points

Hi,

For understanding the chirp parameters and to aid you in its calculations you can go through the below application note. This should provide you more clarity on the parameters.

Programming Chirp Parameters in TI Radar Devices (Rev. A)

The error description will also become more clearer once you check out the application note.

Thanks,

Pradipta.

0 Iulian Sava over 3 years ago in reply to Pradipta Bandyopadhyay

Prodigy 70 points

Hellow,

On the document there is nothing clear about ramp end frequency or the ohters. Can you please give me something else to look into?

Thanks,

Iulian

0 Pradipta Bandyopadhyay over 3 years ago in reply to Iulian Sava

TI__Mastermind 35785 points

Hi,

I can suggest you check the application note shared previously and the training videos.

mmWave radar sensors | TI.com

Then you can check out the OOB demo and SDK user guide to understand more on the parameters and end application.

Thanks,

Pradipta.

Sensors

Sensors forum

AWR2243BOOST: Profile Configuration