DCA1000EVM: DCA1000 + IWR1443Boost

Haozheng Fan

Part Number: DCA1000EVM
Other Parts Discussed in Thread: IWR1443BOOST

Hi,

I am current working on capturing the data with DCA1000 + IWR1443Boost. However it is giving me this error and I don't know what to do with it. I followed every step in the user guide.

Best regards

over 2 years ago

0 Pedrhom Nafisi over 2 years ago

TI__Mastermind 22987 points

Hello,

No LVDS Data is unfortunately one of the most common issues that can occur when trying to use the DCA1000. Just to confirm are you using the user guide that is most updated found in the Radar Toolbox?

https://dev.ti.com/tirex/explore/node?a=1AslXXD__1.20.00.11&node=A__AGTrhNYW8jE6cMxbovlfaA__radar_toolbox__1AslXXD__1.20.00.11

Best Regards,

Pedrhom Nafisi

0 Haozheng Fan over 2 years ago in reply to Pedrhom Nafisi

Prodigy 20 points

Hi Nafisi,

I looked into the user guide and and a little adjustment to it. Now it is able to execute the Data capture Demo now, However, I still cannot do mannual data capture with the DCA1000Arm.

0 Pedrhom Nafisi over 2 years ago in reply to Haozheng Fan

TI__Mastermind 22987 points

Hello,

What happens when you try to do DCA1000 Arm? Do you get an error in the output tab? A screenshot would be helpful to know what is going on.

Best Regards,

Pedrhom

Sensors

Sensors forum

DCA1000EVM: DCA1000 + IWR1443Boost