• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 331 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1843BOOST: mmWave Demo Visualizer Connection issue

Hyeongrae Kim
Prodigy 10 points
Part Number: AWR1843BOOST
Other Parts Discussed in Thread: DCA1000EVM, AWR1843

Hi,

We now have the AWR1843boost and DCA1000EVM boards.
I want to use mmWave Demo Visualizer, but it is not connected from CLI_CFG Port.
The SDK version is 3.6, and the UART port and Auxiliary port were set well as seen in the training video. I tried the troubleshooting method given in the user guide, but it doesn't show any improvement. What should I do??

Thanks

*Please forgive my poor English

  • 0
    TI__Mastermind 20605 points

    Hi,

    I have a few things to point out here.

    • Have you flashed the OOB demo on the AWR1843 device?
    • Are your SOP jumper connections correct?
    • What logs do you see when you connect to the application ports on a tool like TeraTerm?
    • Are you able to send configuration via TeraTerm?
    • If the device and OOB are fine when checked with TeraTerm, can you try to use the visualizer after clearing browser cache data?

    You do not need the DCA1000EVM (This is used to capture raw ADC data that is streamed out of LVDS) to do anything with the mmWave Demo Visualizer.

    Regards,

    Kaushik