AWR6843AOPEVM: MMWAVEICBOOST Suitability for Debugging Clarification Needed Before Procurement

Saicharan S

Part Number: AWR6843AOPEVM
Other Parts Discussed in Thread: AWR6843AOP, MMWAVEICBOOST

Hello TI Forum,

I'd like to double-check before getting the MMWAVEICBOOST – can it be utilized for debugging purposes?

The XDS110 JTAG Debug Probe is currently unavailable, and I noticed that the AWR6843AOP isn't listed as a supported device for the debug probe.

Therefore, is it possible to obtain the MMWAVEICBOOST for debugging?

Thank you

over 2 years ago

+1 Josh Dye over 2 years ago

TI__Mastermind 20681 points

Hello,

Yes, the MMWAVEICBOOST board can be used for debugging. It has an onboard XDS110 which can allow you to connect to the device in Code Composer Studio via JTAG and place breakpoints, step through the code, etc..

Best Regards,

Josh

0 Saicharan S over 2 years ago in reply to Josh Dye

Prodigy 55 points

Hello,

Thank you for your reply.

Sensors

Sensors forum

AWR6843AOPEVM: MMWAVEICBOOST Suitability for Debugging Clarification Needed Before Procurement