• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 273 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1443BOOST: Configuration File send and Data get from IWR1443BOOST

Hiromichi Imabayashi
Intellectual 330 points
Part Number: IWR1443BOOST
Other Parts Discussed in Thread: MMWAVE-SDK

Dear Sir

without using the demo program provided by your company.

The program that acquires the data detected by IWR1443BOOST sends the data of the profile_2d.cfg, profile_calibration.cfg, profile_heat_map.cfg files located in demo\xwr14xx\profiles of mmwave-SDK from XDS110 Class Application/User UART, and then uses IWR1443BOOST to Receive detected data from XDS110 Class Auxiliary Data Port.

Is the above understanding correct?

Please teach me, how to send mmw.cfg in mmwave-SDK's demo\xwr14xx in the same way?

Thank you.

Hiromichi

  • 0
    TI__Genius 11610 points

    Hi Hiromichi,

    You need to run the Out of Box demo on IWR1443BOOST and send the .cfg file through the UART. .cfg file contains the configuration for the sensor which allows the user to modify as per their application. Once the confuguration is sent, the point cloud detected by IWR1443BOOST is sent out through XDS110 Class Auxiliary Data Port

    Regards,

    Abhishek