• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 355 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCA1000EVM: dataPortConfig section used in the json file to configure DCA1000EVM with DCA CLI commands

Gayatri Menon
Intellectual 796 points
Part Number: DCA1000EVM

Hi, 

I am trying to understand the dataPortConfig section in the json file to configure DCA1000EVM with DCA CLI commands. I found the information about all other parameter except for dataPortConfig TI_DCA1000EVM_CLI_Software_DeveloperGuide.pdf. Could you please help me understand the purpose of dataPortConfig section in the json file. 

Thanks 

Gayatri

  • 0
    TI__Mastermind 20605 points

    Hi Gayatri,

    This config is part of the dataFormatConfig which is used to format the data received if required. More details are currently not available. As for simply capturing data, this config would not have to be changed. 

    May I understand your requirement for this info? Are facing any issues while capturing data?

    Regards,

    Kaushik