• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 384 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR6843: Measuring pwr consumption using mmWave Studio

Nona
Intellectual 1730 points
Part Number: AWR6843
Other Parts Discussed in Thread: MMWAVEICBOOST,

Team,

My customer would like to know the power consumption of AWR6843 (PMIC SW_B0 to SW_B4 on MMWAVEICBOOST) in active using mmWave Studio.
Could you please let me know :
- How to measure this using mmWave studio?
- What command should it be issued?

Thank you for your support.
Regards,
Nonaka

  • 0
    TI__Genius 12986 points

    Hey Nonaka-san,

    Please give us some more time to look into this. We will try to respond within the next one to two days.

    Thank you for your patience,

    Kristien

  • 0 in reply to Kristien Everett
    TI__Genius 12986 points

    Hey Nonaka-san,

    Unfortunately, there is no way to measure the power consumption of specifically the PMIC through mmWave Studio during a chirp, but you can use the ContStream tab to measure Tx output power, reflection coefficient, incident voltage, and reflected voltage for a continuous wave output. If you are looking at getting the PMIC power, you would have to directly probe the lines from the PMIC. It might be best to reach out to us over email instead, so we can further discuss what your customer is looking for, and we can get you in touch with someone on the platform test team.

    Regards,

    Kristien