AWR2243BOOST: operating RADAR and dca1000evm by using C++ API

HYOKBEEN LEE

Part Number: AWR2243BOOST
Other Parts Discussed in Thread: DCA1000EVM

Hello,

I am using AWR2243Boost with DCA1000EVM. I want to use this device in the Linux system for operating the radar and capturing raw data.

Is there any C++ API to control and capture AWR2243Boost(DCA1000EVM) without using mmWave Studio GUI?

Thank you!

over 1 year ago

0 Cesar over 1 year ago

TI__Guru*** 148954 points

Hi,

Unfortunately it is not possible to capture raw data from AWR2243BOOST without mmWave Studio

thank you
Cesar

0 HYOKBEEN LEE over 1 year ago in reply to Cesar

Prodigy 120 points

Thank for your reply!

So wouldn't mmwave link solve this problem?

0 Cesar over 1 year ago in reply to HYOKBEEN LEE

TI__Guru*** 148954 points

One would need to have a linux host that supports SPI for configuration and CSI-2 for data. Then one could run mmwave link on the linux host and there would be no need for DCA1000 or mmWave Studio.

Some members of this forum worked on projects with Nvidia Jetson linux host

thank you

Cesar

Sensors

Sensors forum

AWR2243BOOST: operating RADAR and dca1000evm by using C++ API