AWR1843BOOST: how to check raw data from radar memory using CCS?

Wembanyama

Part Number: AWR1843BOOST
Other Parts Discussed in Thread: AWR1843, DCA1000EVM

hi, engineers

I use radar device AWR1843boost to detect objects, no good effect.and always in a off-line way to check my data saving from radar device.

now ,my radar low frame rate, I want to be sure, to some extent, for checking radar data in real-time using CCS to help check and analyse per frame data.

how could I do and which demo could I refer to?

Regards,

Wembanyama

over 1 year ago

0 Josh Wyatt over 1 year ago

TI__Guru* 91206 points

Dear Wembanyama -

As mentioned in AWR1843BOOST Users Manual, the mmWave SDK is available:

https://www.ti.com/lit/ug/spruim4b/spruim4b.pdf (Users Guide)

https://www.ti.com/tool/MMWAVE-SDK (SDK)

other options: https://www.ti.com/tool/AWR1843BOOST#order-start-development

0 Wembanyama over 1 year ago in reply to Josh Wyatt

Intellectual 615 points

hi,

sorry to bother you, I have used awr1843 for some time, and run task for detecting objects in real world.

my question is :

Wembanyama said:
checking radar data in real-time using CCS

I want to know how to check data using CCS, what settings or prerequisites?

Regards,

Wembanyama

0 Josh Wyatt over 1 year ago in reply to Wembanyama

TI__Guru* 91206 points

Wembanyama -

I think in CCS, you would have to open a terminal (either using the one built into CCS or Teraterm/Putty, etc) or to see any data realtime - however, i don't know here if that is useful to you as the visualizer here might be: https://dev.ti.com/gallery/view/mmwave/mmWave_Demo_Visualizer/ver/3.6.0/

0 Wembanyama over 1 year ago in reply to Josh Wyatt

Intellectual 615 points

hi,

whether there is a way checking?

I forgot data capture where there are two ways to check data, DCA1000EVM restored raw data, or in CCS capture data, maybe?

Regards,

Wembanyama

0 Josh Wyatt over 1 year ago in reply to Wembanyama

TI__Guru* 91206 points

Dear Wembanyama -

I am not sure what you mean exactly - here the data will be in a formatted stream of values- which is why the Visualizer was created, so it is easier for people to see what is happening.

Sensors

Sensors forum

AWR1843BOOST: how to check raw data from radar memory using CCS?